Calibration Technician A
Company Name:
SIMCO Electronics
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Santa Clara, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics strategic emphasis is to provide enhanced program management systems and services for customers test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics competencies and a central focus of capital investments and strategic initiatives.
Position Overview
The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician A will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician A will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods, or validate new methods.
Responsibilities and Duties
1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, in order to ensure compliance with published specifications
2. Collect, compile, measure, summarize, and record data gathered during calibration
3. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
4. Identify and correct measurement errors, as applicable
5. Prepare calibration reports and certificates
6. Interact with other technicians, Customer Service Representatives, Account Managers, and customers
7. Other duties and responsibilities as may be assigned
Qualifications
1.Minimum High School diploma or equivalent
2.Must be able to perform general math and algebra functions
3.Must possess good written and oral communication skills
4.Basic ability to troubleshoot repair, align and optimize precision equipment
5.Basic computer skills
6.Proficient in use of MS Word and Excel
7.No previous calibration training required
8.Must have good interpersonal and customer service skills
9.Strong attention to details
10. Must work as a team player, and follow written procedures
Physical Demands
1. Must be able to lift up to 45 pounds without assistance
2. Occasional standing and bending are required
Working Environment
1. Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites
2. Travel may be required to other domestic and possibly international locationsEstimated Salary: $20 to $28 per hour based on qualifications.
SIMCO Electronics
SIMCO Electronics originated in the heart of Silicon Valley in 1962 and was built on a foundation of dedication to customer service and commitment to technical superiority. Today, SIMCO Electronics is headquartered in Santa Clara, CA with a worldwide network of laboratories and international field service teams providing localized support.
SIMCO Electronics strategic emphasis is to provide enhanced program management systems and services for customers test and measurement equipment needs. One global service provider improves quality control and compliance of services while reducing total program costs.
The principal markets served by SIMCO Electronics include Life Sciences, Electronic Components/Semiconductors, Communications/Optical Networking, Automotive, and Government. Specific market-focused expertise is the core of SIMCO Electronics competencies and a central focus of capital investments and strategic initiatives.
Position Overview
The Calibration Technician A will apply knowledge of measurement science, mathematics, physics, and electronics to calibrate inspection, measurement, and test equipment in the Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, and Time & Frequency disciplines to ensure measurement accuracy. The Calibration Technician A will identify and utilize appropriate manual and automated measurement procedures.
This position will normally receive detailed instructions on work, acquire job skills, learn company policies and procedures to complete routine tasks, and work on assignments that are routine in nature where limited judgment is required. The Calibration Technician A will perform laboratory housekeeping and may be required to report opinions and interpretations. The position .is not required to modify methods, develop new methods, or validate new methods.
Responsibilities and Duties
1. Calibrate inspection, measurement, and test equipment (IM&TE) in one or more of the following disciplines Acoustical, Chemical, Dimensional, Electrical -- DC/Low Frequency, Electrical -- RF/Microwave, Fluid, Mechanical, Optical, Thermodynamics, Time & Frequency, in order to ensure compliance with published specifications
2. Collect, compile, measure, summarize, and record data gathered during calibration
3. Identify IM&TE out-of-tolerance conditions and perform corrective action via adjustments, component replacement, correction factors, etc
4. Identify and correct measurement errors, as applicable
5. Prepare calibration reports and certificates
6. Interact with other technicians, Customer Service Representatives, Account Managers, and customers
7. Other duties and responsibilities as may be assigned
Qualifications
1.Minimum High School diploma or equivalent
2.Must be able to perform general math and algebra functions
3.Must possess good written and oral communication skills
4.Basic ability to troubleshoot repair, align and optimize precision equipment
5.Basic computer skills
6.Proficient in use of MS Word and Excel
7.No previous calibration training required
8.Must have good interpersonal and customer service skills
9.Strong attention to details
10. Must work as a team player, and follow written procedures
Physical Demands
1. Must be able to lift up to 45 pounds without assistance
2. Occasional standing and bending are required
Working Environment
1. Works primarily in a laboratory or manufacturing environment at a SIMCO location and/or customer sites
2. Travel may be required to other domestic and possibly international locationsEstimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
